Type of machining
|
Submerged wire cutting
|
Dimensions of complete equipment *
|
2520 x 2340 x 2154 mm
99.21 x 92.12 x 84.8 in
|
Total weight of the equipment without dielectric
|
3900 kg
8598 lbs
|
Machining Area
|
|
Work tank
|
Automatic drop tank
|
Accessibility
|
Front + Left sides
|
Max. workpiece dimensions *
|
800 x 550 x 250 mm
31.49 x 21.65 x 9.84 in
|
Max. workpiece weight without bath
|
450 kg
992 lbs
|
Dimensions of table **
|
680 x 450 mm
26.77 x 17.71 in
|
Floor-to-table distance
|
1000-1100 mm
39.37-43.3 in
|
Total volume of dielectric fluid
|
700 l
185 gal
|
Dielectric level adjustment
|
0 – 250 mm (automatic)
0 – 9.84 in (automatic)
|
Dielectric type
|
Deionized water
|
X, Y, Z and U, V axes
|
|
X, Y, Z travel *
|
350 x 250 x 256 mm
13.78 x 9.84 x 10.08 in
|
U, V travel **
|
± 70 mm
2.75 in
|
Max. speed (X, Y and U, V axes)
|
3 m/min
9.84 ft/min
|
Max. manual position speed
|
2 m/min
6.56 ft/min
|
Linear glass scales
|
Standard on 4 axes (X,Y,U,V)
|
Integrated Collision Protection (ICP)
|
Standard on 5 axes (X,Y,Z,U,V)
|
Taper machining
|
|
Max. taper
|
30°/100 mm
3.94 in
|
Electrical supply (machine)
|
|
Three-phase input voltage
|
400 V ±10%
|
Maximum consumption
|
10.4 kVA
|
Compressed air connection
|
|
Pressure
|
0.6 – 0.8 Mpa
87-116 PSI
|
Maximum consumption
|
150 l/min
40 gal/min
|
* Width x depth x height ** Width x depth
|